Browsing by Type: Публикации в изданиях других стран "Working Paper"
Now showing items 1-20 of 283
-
A poowerful tool continue teaching students and ourselves
(АГУ, 2013)Khramtsova, M. V. A poowerful tool continue teaching students and ourselves / M. V. Khramtsova // Межкультурная коммуникация и СМИ : материалы IV Международной научно-практической конференции, Барнаул, 15 июня 2013 г. – 2013. – С. 44-47.2014-03-31 -
Anchorage of Retaining Walls and Antilandslide Structures
(2013)The article describes the experience of designing, arrangement and testing of anchors for fixing the protection of deep foundation pits in narrow urban areas on various construction projects during the reconstruction.2018-03-10 -
Application of Modern Educational Technologies at the Research University
(2015)Application of modern educational technologies for diagnosing set education results, student motivation increase, influencing creative thinking ability aimed at problem solving, critical understanding of information and independent educational activity skills development are discussed in the paper.2018-03-10 -
Bristlebots in swarm robotics - new approaches in modeling and agent development
(2016)Bristlebots are vibration-driven mobile robots. They are characterized by small size, high speed, simple design and low costs of production and application, which are ad- vantageous qualities for agents of swarm robotic systems. In this paper, new ap- proaches in modeling and development of swarm agents are given. It is shown that a simple mass point model can be used to simulate ...2019-12-19 -
Business valuation in emerging markets
(TAF, 2008)Problems of peculiarities of business valuation techniques in emerging markets are discussed in the paper.2014-02-05 -
Changing of technical and operational road parameters caused by traffic load and climatic factors
(2014)Climatic factors and car wheels are the reasons of changes in road condition: deformations of subgrade, cracks, potholes and rut appear, roughness and safety are deteriorating, and the strength of the road structure reduces. In our opinion, cracks in the road structure are of particular importance. The appearance of cracks causes the destruction of the whole road structure during ...2018-03-10 -
Composite Materials for Steel Cutting and Concrete Crushing
(2017)The steel based on composite material, created by the stitching of steel matrix by a flow of powder particles. Stitching process implemented in conditions of super deep penetration (SDP) which provides a penetration of the powder particles at speed 1000 m/s on depth up to hundred millimeters. Due to the interaction between the particles and the steel matrix at pulsating pressureabove ...2018-03-10 -
The design and composition of expansion joints on big-span bridges with intensive heavy-duty traffic
(2016)In the Republic of Belarus the roads with a high intensity of transport most widely employ expansion joints with rubber and steel compensators fastened to the reinforced concrete base with embedded therein studs. While operated expansion joints are exposed to various kinds of operational and climatic impacts causing their damage. Expansion joints destruction results in a sharp ...2018-03-10 -
Dynamics of photoinduced electron transfer in multiporphyrin nanoassemblies
(World Scientific Publishing Co., 2015)In self-assembled nanoscale porphyrin triads based on Zn-octaethylporphyrin chemical dimer (donor, D) and dipyridyl substituted porphyrin free base (acceptor, A), fluorescence quenching of D (down to 1.7-10 ps) and A (by ~1.3-1.6 times) subunits is strongly dependent on the solvent polarity (toluene-acetone mixtures) and temperature (77-350 K). The obtained experimental findings ...2017-05-27 -
Effect of Vertical Cross-Sectional Shape of Foundation on Settlement and Bearing Capacity of Soils
(2013)Load-settlement relationships of shallow foundation models with different vertical cross-sectional shapes on different modeled subsoil conditions are presented. Model of shallow foundations with rectangular, wedge and T-shape vertical cross-sections were studied. The study generally shows that bulk of the load resistance of subsoil bases at the instance of shallow foundations ...2018-03-10 -
Laboratory Investigation of Load Incremental Effect on the Deformation of Clay Under Axially Loaded Modeled Circular Piles
(2013)This paper presents the results of recent experimental investigation of load incremental effect on the deformation of clay under axially loaded modeled wooden circular piles in clay. The modeled piles consist of 20 mm diameter, 200 mm length, made up of single pile, 4 No pile group of 2x2 with centre to centre a = 4d, and 9 No pile group of 3x3 with centre to centre a = 3d, were ...2018-03-10 -
Linguistic and acoustic resources of the computer-based system for analysis and interpretation of speech intonation
(Ульяновский ГТУ, 2017)This paper considers suprasegmental parameters such as intonation, stress and speech rhythm. Correct articulation of sounds and correct pronunciation in the target language depend on prosodic structures presented by standard intonation patterns. Linguistic and acoustic resources provide the basis for computer-aided intonation training in and outside the classroom. There is a great ...2021-06-28 -
Modern approach in natural language processing systems for summarization
(Томский политехнический университет, 2016)Makarych, M. V. Modern approach in natural language processing systems for summarization / M. V. Makarych // Межкультурная коммуникация: теория и практика : сборник научных трудов XVI международной научно-практической конференции, (Томск, 11-13 октября 2016 г.) / Томский политехнический университет ; ред. Ю. В. Кобенко. – Томск : Томский политехнический университет, 2016. – С. 303-306.2019-09-30 -
Modern trends in improvement of steel heating technology in continuous furnaces
(2016)The principles and approaches in the development and improvement of steel heating technology in the furnaces of rolling manufacture of various structural design, based on the systematic study of thermal physical and technological processes, including mathematical modeling, industrial experiments, development of rational temperature-thermal modes.2018-02-27 -
On the formation features and some material properties of the coating formed by laser cladding of a nicrbsi self-fluxing alloy
(Springer, 2018)In the present paper, the influence of laser cladding conditions on the powder flow conditions as well as the microstructure, phases, and microhardness of a Ni-based self-fluxing alloy coating is studied. The formation regularities of a coating microstructure with different cladding conditions as well as patterns of element distribution over the coating depth and in the transient ...2023-10-05 -
Operation of a Spark-Ignition Engine on Mixtures of Petrol and N-Butanol
(2017)The Article analyses the use of n-butanol (biobutanol) in mixtures with petrol in spark-ignition (SI) internal combustion engines (ICE). Analysis of the scientific literature allowed determining that n-butanol content had a different effect on the same engine parameters in different tests, thus a decision was made to conduct additional research, where, having assembled the necessary ...2018-03-10 -
Profit optimization taking into account tax burden and market prices
(СПбГУ ИТМО, 2017)The article discusses the idea of search for maximum value profit in conditions of taxation. Using ratio method of estimation of the tax burden on the cash flows of the enterprise managed to construct a mathematical model that allows analyzing the profit by taking the derivative.2021-07-20 -
Some aspects of sherardizing implementation during anti-corrosion protection of heat-treated metal parts
(2015)The article reveals the peculiarities of obtaining Zn anticorrosive diffusion layers on heat-treated metal parts using sherardizing method. It is shown that sherardizing processes can be successfully used as a final heat treatment operation for some metal parts after hardening in a temperature gap between 350-700 degrees C. 380-450 degrees C. are the most efficient temperatures ...2018-03-15 -
Some principles of teaching translation
(АГУ, 2013)Перепечко, Н. Н. Some principles of teaching translation / Н. Н. Перепечко // Межкультурная коммуникация и СМИ : материалы IV Международной научно-практической конференции, Барнаул, 15 июня 2013 г. – 2013. – С. 71-74.2014-03-31 -
Unleashing the power of Twitter
(АГУ, 2013)Khramtsova, M. V. Unleashing the power of Twitter / M. V. Khramtsova // Межкультурная коммуникация и СМИ : материалы IV Международной научно-практической конференции, Барнаул, 15 июня 2013 г. – 2013. – С. 47-50.2014-03-31