Приборы и методы измерений
Sub-communities within this community
Recent Submissions
-
Калибровка состава низколегированных сталей интервальным методом частичных наименьших квадратов по эмиссионным спектрам низкого разрешения с коррекцией базовой линии
(БНТУ, 2024)Экспрессное определение элементного состава сталей и сплавов на основе железа является актуальной задачей, для решения которой может применяться лазерно-искровая эмиссионная спектроскопия. Недостатком одно- или многопараметрических решений этой задачи является их полуколичественный характер. Целью работы являлась разработка количественных многопараметрических калибровок концентраций ...2024-05-23 -
Determination of Crack Resistance of the Cover and Slide Glass by Indentation Method with the Visualization Using Atomic Force Microscopy
(БНТУ, 2024)Crack resistance of two types of glass was studied – cover glass (0.17 mm thick) and slide glass (2 mm thick) using an improved technique through the use of the probe methods, which makes it possible to increase the accuracy of determining the crack resistance of glass. Colorless silicate glass was used. Crack resistance was determined by the Vickers pyramid indentation method. ...2024-05-23 -
Determination of the Concentration of Tm3+ and Ho3+ Ions in the Glass and Crystalline Phases in Oxyfluoride Glass Ceramics by Absorption Spectra Analysis
(БНТУ, 2024)Optical glass ceramics based on oxyfluoride glasses activated by rare earth ions have attractive properties for development of lasers and near-infrared amplifiers, since they combine properties of fluoride crystals with low phonon frequencies and chemical and mechanical properties of oxide matrices. Spectroscopic properties of activator ions in crystalline and glass phases of ...2024-05-23 -
Temperature Measuring Method Accuracy Evaluation in the Microarc Heating Process Based on Reproducibility and Uncertainty Indicators
(БНТУ, 2024)It is necessary to control temperature using thermoelectric sensors for steel products surface alloying in conditions of microarc heating. The using S-type thermocouples possibility has been substantiated, main factors affecting the measurement results have been established, and the the reproducibility index functional dependence on the measured temperature has been determined, ...2024-05-23 -
Методы оценки точности систем гироскопической стабилизации видеокамеры на подвижном объекте
(БНТУ, 2024)Для повышения качества визуальной информации, поступающей с видеокамер, их устанавливают на платформы систем гироскопической стабилизации, обеспечивающие требуемую ориентацию оптической оси. Целью работы являлась разработка математического описания, позволяющего оценить точность систем гироскопической стабилизации видеокамеры на подвижном объекте, построенной на микромеханических ...2024-05-23 -
Газочувствительные характеристики маломощных полупроводниковых газовых сенсоров при воздействии СО и H2
(БНТУ, 2024)В связи с жёсткими требованиями по определению концентрации газов в рабочей среде является актуальной разработка полупроводниковых сенсоров для обеспечения оперативного реагирования и безопасности персонала в промышленных и бытовых помещениях. Целью работы являлось исследование газочувствительных и динамических характеристик высокочувствительных маломощных сенсоров, изготовленных ...2024-05-23 -
Nanostructured Coatings Based on Langmuir–Blodgett Films of Perfluorodecanoic Acid for Flexible Sensors for the Analysis of Lead Ions in Water
(БНТУ, 2024)As a result of anthropogenic activities, the environment is polluted by heavy metals. The most important task is to find methods to control their content in water. Track-etched membranes (TeMs) can be relatively easily modified by nanometer layers of functional materials with using the Langmuir‒Blodgett technique, which makes it possible to specifically change the structural, ...2024-05-23 -
Оптимальные режимы печати и постобработки полимерных изделий, полученных по SLA-технологии аддитивного производства
(БНТУ, 2023)Появление инновационных производственных технологий, таких как аддитивный синтез, требует одновременного развития методов оценки качества выпускаемой продукции. На начальном этапе внедрения новых способов производства в различные отрасли промышленности, как правило, применяют наиболее изученные и широко используемые на практике методы контроля. В большинстве случаев это стандартные ...2023-12-12 -
Модифицирование оксидом олова газочувствительных слоёв из оксида индия для повышения эффективности газовых сенсоров
(БНТУ, 2023)Мониторинг присутствия посторонних примесей в воздухе относится к одному из актуальных направлений детектирования газов для применения в промышленности и быту. Повышение требований к контролю содержания взрывоопасных и токсичных газов на уровне предельно допустимых концентраций при высокой селективности определяет необходимость совершенствования существующих газоаналитических ...2023-12-12 -
Influence of Temperature from 20 to 100 °C on Specific Surface Energy and Fracture Toughness of Silicon Wafers
(БНТУ, 2023)The influence of temperature in the range from 20 to 100 °C on the specific surface energy and fracture toughness of standard silicon wafers of three orientations (100), (110) and (111) was studied. Silicon wafers were heated on a special thermal platform with an autonomous heating controller, which was installed under the samples. At each temperature, the samples were kept for ...2023-12-12 -
Use of the Laser Beam Deflection Technique for Thermo-Optic Coefficients Study in Gadolinium-Yttrium Oxyorthosilicate Doped with Erbium Ions
(БНТУ, 2023)Results of use of the laser beam deflection technique for determination of thermo-optic coefficients (TOCs) of the Er3+-doped gadolinium-yttrium oxyorthosilicate crystal (Er3+:(GdY)2SiO5 – Er:GYSO) are presented. A 0.1 at.% Er-doped gadolinium-yttrium oxyorthosilicate crystal was grown by the Czochralski method under nitrogen atmosphere. Raw materials such as Er2O3, Gd2O3, Y2O3, ...2023-12-12 -
Семейство электронных стрелковых тренажёров «СТрИж»: уровни реализации и структура свободного программного обеспечения
(БНТУ, 2023)Разработка стрелковых электронных тренажёров (т. е. для ручного оружия и не использующих боеприпасы) является важной задачей, т. к. производство любого вида стрелкового вооружения, согласно нормативным документам, требует и производства тренажёра для привития навыков прицеливания и стрельбы. Описано семейство электронных стрелковых тренажёров «СТрИж» четырёх уровней реализации: ...2023-12-12 -
Эксплуатационные характеристики исследовательских и испытательных стендов и установок с тяжёлыми жидкометаллическими теплоносителями
(БНТУ, 2023)Тема исследовательских стендов на тяжёлом жидкометаллическом теплоносителе в данное время переживает второе рождение. Построены экспериментальные стенды, к примеру, LILLA SCK CEN (Центр ядерных исследований в Бельгии, г. Мол). Это один из наиболее известных стендов, который использует тяжёлые жидкометаллические теплоносители. Но достаточно полного описания компоновки оборудования ...2023-12-12 -
Peculiarities of Optoacoustic Excitation and Propagation of Plate Waves in Thin-Walled Оbjects
(БНТУ, 2023)Increasing the efficiency of non-destructive control of lamellar materials with single and double-layer structure is an urgent scientific and technical task. The aim of the work was to investigate the peculiarities of excitation and reception of plate waves (PW) in single-layer and two-layer materials by pulsed laser radiation in relation to detection of cracks in them and ...2023-12-12 -
Automatic Measurement in Metallography
(БНТУ, 2023)Quantitative analysis of the structure of metals and alloys is an important part of modern metal science. To obtain quantitative data and build dependencies, metallographic image processing programs are used, oriented both for scientific research and for use in industry. Programs capable of automatically performing metallographic analysis are of great interest to consumers. When ...2023-10-18 -
Использование многозондового модулированного лазерного излучения для идентификации сгустков веществ в потоке жидкости
(БНТУ, 2023)Современные средства контроля систем обеспечения водой на предприятиях или в жилищной сфере используют лазерные системы зондирования жидкости. При этом, как правило, используются лабораторные анализы полученных проб жидкости, а также спектральные методы анализа при сканировании жидкости излучением разных длин волн. Эти подходы не позволяют проводить анализ в реальном масштабе ...2023-10-18 -
Application of the Hough Transform to Dispersion Control of Overlapping Particles and Their Agglomerates
(БНТУ, 2023)The dispersion control of micro- and nanoparticles by their images is of great importance for ensuring the specified properties of the particles themselves and materials based on them. The aim of this article was to consider the possibilities of using the Hough transform for dispersion control of overlapping particles and their agglomerates. Analysis of the application of the ...2023-10-18 -
Backscattering of Ultrasonic Waves as the Basis of the Method of Control of Structure and Physicо-Mechanical Properties of Cast Irons
(БНТУ, 2023)Increasing the reliability of control of cast iron structure and its physical and mechanical characteristics is an important scientific and technical task of the machine-building industry. The paper studies the possibilities of controlling the structure of cast irons using structural noise created by ultrasonic scattering on graphite inclusions of different shapes. The subject ...2023-10-17 -
О возможности использования медицинских линейных ускорителей электронов в качестве источника поля эталонного импульсного фотонного излучения
(БНТУ, 2023)Генерирующие источники импульсного фотонного излучения находят все большее применение в науке и промышленности. В связи с этим растёт потребность в приборах дозиметрического контроля, способных работать в полях импульсного фотонного излучения. Однако до настоящего времени нет исчерпывающей методики, описывающей критерии выбора источников эталонных полей импульсного фотонного ...2023-10-17 -
Application of the Thermal Diffusivity Standard for the Heat Transfer Parameter Control in Absorbing Materials
(БНТУ, 2023)Metrological support creation and use of heat transfer etalons are important stages in the development of modern materials science. This is especially concerned to the emergence of new materials in the world with previously unattainable thermophysical parameters. The purpose of this work was to develop and experimentally verify the idea of joint application of the transient ...2023-10-17