Browsing Выпуск 26 by Title
Now showing items 17-36 of 58
-
К 80-летию Ивлева Дюиса Даниловича
(БНТУ, 2011)Климов, Д. М. К 80-летию Ивлева Дюиса Даниловича / Д. М. Климов, В. А. Ковалев, Ю. Н. Радаев // Теоретическая и прикладная механика : международный научно-технический сборник / Белорусский национальный технический университет ; редкол.: А. В. Чигарев (пред. редкол.). – Минск : БНТУ, 2011. – Вып. 26. – С. 3-16.2020-05-26 -
К вопросу о кручении стержней некруглого поперечного сечения
(БНТУ, 2011)The account of torsion bars with a non-round cross-section is presented. It’s a practical interesting method as most simply account. The approximation of geometrical reinforce with 8 per. miscalculation is received. The particular cases of non-round cross-sections (there are ellipse, triangle and rectangle) are considered.2020-05-26 -
Кафедра теоретической механики в юбилейный год БПИ-БГПА-БНТУ
(БНТУ, 2011)Чигарев, А. В. Кафедра теоретической механики в юбилейный год БПИ-БГПА-БНТУ / А. В. Чигарев, Н. И. Горбач // Теоретическая и прикладная механика : международный научно-технический сборник / Белорусский национальный технический университет ; редкол.: А. В. Чигарев (пред. редкол.). – Минск : БНТУ, 2011. – Вып. 26. – С. 25-27.2020-05-26 -
Кинематический метод определения эффективных термоупругих характеристик пространственно армированных сред
(БНТУ, 2011)Предложена структурная модель термоупругого поведения пространственно армированной среды при общей анизотропии компонент композиции. На основе энергетического критерия эквивалентности и кинематических допущений о связи усредненных деформаций такого композита с деформациями в компонентах композиции определены термоупругие характеристики эквивалентного материала. Показано, что на ...2020-05-26 -
Кинематическим анализ пространственного рычажного механизма методом преобразования координат
(БНТУ, 2011)The article is devoted to the features of use of a method of transformation of coordinates at the kinematic analysis of the closed spatial mechanism.2020-05-26 -
Колебания вязкоупругой пластины на основании винклера
(БНТУ, 2011)The axisymmetric forced vibrations of a viscoelastic circular sandwich plate on an elastic foundation are studied. The plate is subjected to axisymmetric loads with frequency equal to one of the natural frequencies of the plate. The foundation reaction is described by the Winkler model. The problem on the viscoelastic plate oscillations was solved by averaging. The numerical ...2020-05-26 -
Компьютерный практикум по проектированию рычажных механизмов
(БНТУ, 2011)Бокун, Г. С. Компьютерный практикум по проектированию рычажных механизмов / Г. С. Бокун, В. С. Вихренко, Д. В. Гапанюк // Теоретическая и прикладная механика : международный научно-технический сборник / Белорусский национальный технический университет ; редкол.: А. В. Чигарев (пред. редкол.). – Минск : БНТУ, 2011. – Вып. 26. – С. 248-251.2020-05-26 -
Локальные колебания вязкоупругих конических оболочек
(БНТУ, 2011)Рассматривается класс задач о свободных колебаниях вязкоупругих конических оболочек средней длины. Оболочки не обязательно являются оболочками вращения, края оболочки в общем случае являются не обязательно плоскими кривыми. Материал этой статьи опирается на результаты работы [1], в которой был предложен метод построения решения уравнений пологих оболочек, сосредоточенного в ...2020-05-26 -
Методы получения и применение наноматериалов
(БНТУ, 2011)Nanomaterials is а field which takes a materials science-based approach to nanotechnology. It studies materials with morphological features on the nanoscale, and especially those which have special properties stemming from their nanoscale dimensions. Nanoscale is usually defined as smaller than a one tenth of a micrometer in at least one dimension, though this term is sometimes ...2020-05-26 -
Моделирование напряженно-деформированного состояния цилиндрических оболочек конечной длины при неравномерном нагреве и нейтронном облучении
(БНТУ, 2011)А cylindrical shell undergoing irregular temperature and radiation has been considered. The numerical solution has been proposed to solve the problem for fuel cladding under creep, thermal and radiation strains. A graphic distribution of deflections and stresses of a short cylindrical shell have been received.2020-05-26 -
Моделирование свободных колебаний реконструированного среднего уха, подвергнутого тимпаностапедопластике и перфорации подножной пластины стремени
(БНТУ, 2011)Biomechanical model of the reconstructed middle ear subjected to tympanostapedoplasty and the stapes footplate perforation is proposed. The basic goal of this study is to clear up the influence of the tangential displacements in an eardrum at modes andfundamental frequencies of the reconstructed middle ear. The reconstructed tympanic membrane is modeled as an isotropic elastic ...2020-05-26 -
Моделирование текучести нелинейно упруговязкопластических материалов в условиях одноосного сжатия
(БНТУ, 2011)Fluidity modeling of а nonlinear elastic viscoplastic material in conditions of uniaxial compression has been carried out. Changes of the area of cross section of a sample and linear factor of deformation from time have been taken into account. Results of modeling have been compared to experimental data.2020-05-26 -
Модель и анализ контактного взаимодействия с биотканями одномерных полимерных имплантатов
(БНТУ, 2011)The base stage of implantation in a kind of one-dimensional prosthetic (fixing, diagnostic) element, stretching through an aperture in a biotissue, is considered. The developed mechanical and mathematical model describes implant interaction with biotissues in the conditions of sticking and sliding of contacting surfaces. The calculated dependences for implant elongation and the ...2020-05-26 -
Модель изменения физико-механических свойств и накопления повреждений в суставах человека
(БНТУ, 2011)The approach permitting modeling the work of a human joint as interacting surfaces with allowance of the change of physical-mechanical properties and damage accumulation in tissues, participating in motion in a joint is offered. The obtained results demonstrate changes going on in a site of a contact during ageing process.2020-05-26 -
О структуре плоских механизмов с высшими кинематическими парами
(БНТУ, 2011)For flat mechanisms with the higher steams (gear, cam and similar) classification with allocation of groups with w=0, containing the higher steams is offered. In most cases such groups are one-links (with n=l, P„=l, Pb=1), and two-links (c n=3, Pi=2, Ph=2).2020-05-26 -
Об использовании СКМ «Mathematica» в качестве программной среды для моделирования движений антропоморфного робота
(БНТУ, 2011)In the article the technique of the automated compiling of differential equations of motion of the anthropomorphic robot is reviewed. The technique of activity with the results of numerical calculations in the system of computer mathematics "Mathematica", its animation capabilities and the export of the results in the generally accepted format of saving and reviewing of the video ...2020-05-26 -
Обучение студентов созданию презентаций в Power Point
(БНТУ, 2011)Обучение студентов созданию презентаций в Power Point / П. П. Анципорович [и др.] // Теоретическая и прикладная механика : международный научно-технический сборник / Белорусский национальный технический университет ; редкол.: А. В. Чигарев (пред. редкол.). – Минск : БНТУ, 2011. – Вып. 26. – С. 304-308.2020-05-26 -
Объединение решений в программном комплексе ANSYS 12
(БНТУ, 2011)Possibility on association of decisions in program complex ANSYS 12 on a problem example about mixing of liquids with various temperatures and speeds of movement in pipes is presented.2020-05-26 -
Операторный метод решения системы дифференциальных уравнений термоупругости
(БНТУ, 2011)In article the operational method of the decision of system of the differential equations of thermoelasticity is considered.2020-05-26 -
Определение силовых характеристик неустановившегося поворота шарнирно сочлененной машины с тремя осями
(БНТУ, 2011)In the article have been considered a unsteady turn of hinged machine. The research is topical because the up-to-date state of open-cut method progress of mineral product on majority of operating enterprise is characterized by open cast mine deepening, by load distance increasing and by angle of ascent of track rising.2020-05-26