Browsing Литье и металлургия by Title
Now showing items 12-31 of 2927
-
Ecocure Blue – new Cold Box system with ultra-high efficiency and as low as possible emissions
(БНТУ, 2018)By omitting materials subject to the labeling requirement in part 1 cold-box resin, Düker GmbH from Laufach can achieve an impressive reduction in emissions. Emission and workplace exposure limit values represent major challenges for foundries, and are becoming increasingly important due to every stricter statutory regulations. In particular, compliance with emission guidelines ...2018-04-07 -
Formation of highly resistant carbide and boride coatings by a two-stage deposition method
(БНТУ, 2011)A study was made of the aspects of forming highly resistant coatings in the surface zone of tool steels and solid carbide inserts by a two-stage method. At the first stage of the method, pure Ta or Nb coatings were electrodeposited on samples of tool steel and solid carbide insert in a molten salt bath containing Ta and Nb fluorides. At the second stage, the electrodeposited ...2014-07-02 -
Gefuege und eigenschaften von patentierten hochgekohlten draht
(БНТУ, 2011)Analyse der mechanischen Eigenschaften und Mikrostruktur der Cordstahlproben Marke 80 nach isometrischen Austenitzerfall bei Bleischmelzetemperatur 610–400 ºС bei Ladorbedingungenzeigte.2014-07-02 -
GIFA-2007
(БНТУ, 2007)Овчинников, В. В. GIFA-2007 / В. В. Овчинников, М. А. Садоха // Литье и металлургия. – 2007. – № 3 (43). – С. 124 - 131.2015-07-30 -
HEINRICH WAGNER SINTO-фирма концерна SINTO
(БНТУ, 2001)Мушна, К. HEINRICH WAGNER SINTO-фирма концерна SINTO / К. Мушна // Литье и металлургия. – 2001. – № 3. – С. 45-47.2021-02-25 -
ISO на ОАО "МЗОО"
(БНТУ, 2003)Сашнев, С. B. ISO на ОАО "МЗОО" / С. B. Сашнев // Литье и металлургия. – 2003. – № 4. – С. 19-21.2021-02-15 -
The latest developments in control systems for chemically bonded sand continuous mixers
(БНТУ, 2005)Fenyes, L. M. The latest developments in control systems for chemically bonded sand continuous mixers / L. M. Fenyes // Литье и металлургия. - 2005. – № 2 (34), [ч.2]. - С. 184 - 185.2016-03-23 -
MAGNAHOT - новое слово в НОТ-ВОХ-технологии
(БНТУ, 2006)Милехин, В. А. MAGNAHOT - новое слово в НОТ-ВОХ-технологии / В. А. Милехин // Литье и металлургия. - 2006. – № 3. - С. 98 - 100.2016-03-10 -
Materials and developments of the company Heinrich Wagner Sinto Maschinenfabrik GmbH
(БНТУ, 2019)The company Kutes Metall equips its foundry with a SEIATSU molding plant manufactured by Heinrich Wagner Sinto. The special feature of this molding plant. The SEIATSU.plus compaction process which enables different compaction techniques and combinations depending on requirements. In particular, with an occupancy up to the edge of the molding box optimum pressure values and ...2019-04-05 -
Measuring of depth profile of defects of hot rolled steel sheet by imaging the grating on sheet surface
(БНТУ, 2011)The approach to measure defect of mill products during their rolling is considered. The performance of supposed scheme is analyzed for real time conditions.2014-07-02 -
Modeling of precipitation kinetics of manganese and copper sulfides in interstitial free steels
(БНТУ, 2009)Modeling of precipitation kinetics of manganese and copper sulfides in interstitial free steels / M. H. Hong [et al.] // Литье и металлургия. – 2009. – №4 (53). – С. 39 - 43.2015-05-25 -
Morphology modification of carbon chrome molybdenum steel structure influenced by heat treatment
(БНТУ, 2011)The influence of temperature and time parameters of thermal treatment on structural change and properties of carbon chromium molybdenum steel has been studied. It has been shown that there are considerable areas with grainy morphology of cementite after high temperature tempering in the structure of steel. It assures reduction of steel microhardness by 25%, and there are no ...2014-07-02 -
New trends in steel cord development
(БНТУ, 2011)The analysis of directions of metal cord constructions developments depending on the place of application in tires of different function is carried out. The requirements to metal cord, which are necessary to be taken into account at development of its new type, are given. The peculiarities of perspective types of reinforcing agents for tires, and also advantages of new types of ...2014-07-02 -
OLAP-технологии как инструментарий поддержки принятия решений
(БНТУ, 2017)Настоящая статья раскрывает базовые принципы работы с OLAP-технологиями, демонстрирует ключевые особенности по сравнению с традиционными системами отчетности. Рассмотрена упрощенная структура OLAP-куба для анализа себестоимости продукции сталеплавильного цеха.2017-07-05 -
One – stage metal wastes recycling
(БНТУ, 2011)Rotary tilting furnace is the most efficient installation for recycling of dispersible metal wastes of any alloy. Several constructions have been designed for chips heating and melting, scale recovery, ets.2014-07-02 -
Pattern Recognition System
(БНТУ, 2005)Fenyes, L. M. Pattern Recognition System / L. M. Fenyes // Литье и металлургия. - 2005. – № 2 (34), [ч.2]. - С. 182 - 183.2016-03-23 -
Performance evaluation of metal mould for casting aluminium alloy (AA6063) of scientific products in national agency for science and engineering infrastructure
(БНТУ, 2023)The study investigated the major Causes of inconsistency in the cast results of the aluminium cast products from the metal moulds supplied by the then Hungarian Technical Partners to Scientific Equipment Development Institute, Minna. The metal moulds for different scientific products for Schools Scientific Laboratories were to achieve mass production of these products. The aluminium ...2023-03-27 -
Perspective reinforcing material for fibre concrete
(БНТУ, 2011)The different types of wire fiber are considered, advantages of fiber of high-modular wire with heightened bending stiffness are shown. Analysis by volumes of fiber production in the world is carried out. Peculiarities of fiber production at RU P «BMZ» are shown. Recommendations on correlation «wire diameter-fiber length» are given for different types of fiber for prevention of ...2014-07-02 -
PoligonSoft для литейного производства
(БНТУ, 2022)В статье рассказывается о системе компьютерного моделирования литейных процессов «ПолигонСофт». Описаны основные возможности системы, рассказано о стадиях работы в ней. Отдельно рассматриваются особенности последней версии программного продукта: что нового в решателе заполнения и напряженно-деформированного состояния, что нового в препроцессоре и сеточном генераторе. Проведен ...2022-11-11 -
Properties and applications of antifriction silumin
(БНТУ, 2011)Antifrictional silumin which excels traditional bronzes in mechanical and tribotechnical properties is developed. Ecologically safe casting technology of billets of 30–300 mm in diameter of antifrictional silumin is created. Their cost is 2–3 times lower than that of similar bronzes. The new technology is introduced in manufacture in the Republic of Belarus.2014-07-02