Browsing Том 1 by Title
Now showing items 55-74 of 85
-
Оценка токсикологического действия СОЖ, используемых при резании металлов
(БНТУ, 2020)In this paper we consider the problem of the impact of waste lubricating technological means (LTT) on the human body. Particular attention is paid to the main paths of receipt of hazardous substances into the body LTT workers and has the effect of occupational diseases. It is proved that under the influence of oil on the body develop diseases such as lung cancer, throat, lips, ...2021-01-26 -
Перспективы использования производимых в КНР композитных гранул по технологии LFT-G в производстве перспективного типа конструкционных материалов – нанокомпозитов
(БНТУ, 2020)The possibility of using Chinese raw materials (pellets) made using the LFT-G technology in the production of promising nanocomposite materials (nano-armor and substrates for it) is considered. For comparison and an example, the characteristics of various high-impact materials suitable for creating nanocomposites in the POLYADAMANTIUM project on the territory of the Republic of ...2021-01-26 -
Повышение эффективности работы технологического оборудования при проведении буровзрывных работ на карьере строительного камня
(БНТУ, 2020)The main types of equipment for carrying out drilling and blasting operations in a building stone quarry are considered: shot holes drills in rocks, as well as machines for mechanized loading of explosives in the production of massive explosions in quarries. The features of the application of technological schemes for switching charges in the production of mass explosions at ...2021-01-26 -
Подход к оценке рациональности выбора программных и аппаратных продуктов пользователями
(БНТУ, 2020)The analysis of methods to carry on usability assessment based on self-reported parameters is presented. A set of approaches to determine the rationality of user’s choice of software and hardware products is proposed to reveal overestimation, underestimation and adequate choices.2021-01-26 -
Полуавтоматическая транспортная платформа для путешествий
(БНТУ, 2020)A robotic platform for personal luggage transportation is discussed. Choices of the element base, the control system principle, and the protocols for connection with the operator are presented.2021-01-26 -
Правовые системы Китая и Беларуси: общее и особенное
(БНТУ, 2020)Пастухова, Д. М. Правовые системы Китая и Беларуси: общее и особенное / Д. М. Пастухова // Новые горизонты - 2020 : сборник материалов VII Белорусско-Китайского молодежного инновационного форума, 17 ноября 2020 года / Белорусский национальный технический университет. – Минск : БНТУ, 2020. – Т. 1. – С. 179-180.2021-01-26 -
Применение микросекундных импульсных режимов для электрохимического полирования поверхности легкоокисляемых металлов и сплавов
(БНТУ, 2020)Studies of the influence of the amplitude, frequency and duration of pulses on the surface quality of titanium, zirconium and magnesium alloys during pulsed electrochemical polishing are presented.2021-01-26 -
Программная система самотестирования для оценки эргономики программных продуктов
(БНТУ, 2020)The approach for self-testing of the software efficiency for the current user is discussed based on the express-testing with personal biometric devices. The mobile software system similar to fitness training software is proposed to carry on such express tests.2021-01-26 -
Производство китайского рапса и эффект сбалансированного удобрения
(БНТУ, 2020)The article is devoted to rapeseed as an important crop with high economic value. The areas of application of rapeseed, the importance of this crop for China and the need for balanced fertilization of rapeseed crops to obtain high yields are indicated.2021-01-26 -
Развитие робототехники в рамках программы индустрия 4.0 на примере республики беларусь и Китайской Народной Республики
(БНТУ, 2020)The article investigates the Industry 4.0 program and the development of robotics in Belarus and China2021-01-26 -
Разработка технологии формирования газотермических композиционных покрытий, модифицированных наноуглеродными компонентами
(БНТУ, 2020)One of the main tasks in mechanical engineering is to reduce costs and increase the resource of parts of friction units. One of the ways to solve this problem is the application of thermal gas composite coatings. This research was carried out in the "Industrial research laboratory of plasma and laser technologies" (BNTU) to develop the technology for the introduction of nanocarbon ...2021-01-26 -
Разработка технологии формирования газотермических композиционных покрытий, модифицированных наноуглеродными компонентами
(БНТУ, 2020)One of the main tasks in mechanical engineering is to reduce costs and increase the resource of parts of friction units. One of the ways to solve this problem is the application of thermal gas composite coatings. This research was carried out in the "Industrial research laboratory of plasma and laser technologies" (BNTU) to develop the technology for the introduction of nanocarbon ...2021-01-26 -
Реактивный ионно-лучевой синтез тонких пленок HfO2
(БНТУ, 2020)The effect of the composition of the working gas, the substrate temperature and the target potential and characteristics of thin films of hafnium dioxide on a silicon substrate, obtained by reactive ion-beam sputtering of a metal target, has been studied. It has been established that with an increase in the partial pressure of oxygen from 2.52•10–2 to 5.85•10–2 Pa, the dielectric ...2021-01-26 -
Решение проблем инструментального производства при проектировании сложнопрофильных фасонных и сборных инструментов методом 3D-моделирования
(БНТУ, 2020)It is proposed to use the methods of computer 3D modeling to solve the problems of manufacturing complex shaped tools that work by copying when processing cylindrical, screw surfaces, and prefabricated tools with spatial basing of a removable polyhedral plate.2021-01-26 -
Система съема и анализа физиологических показателей
(БНТУ, 2020)This article is devoted to the development of the possible structure of the collection and analysis system of physiological information, as well as the analysis of the adequacy of use of its constituent modules.2021-01-26 -
Системы регенерации и резервирования топлива на теплоисточнике
(БНТУ, 2020)At present, several problems can be identified in the energy system of the Republic of Belarus. In the structure of consumption of fuel and energy resources, natural gas predominates [1], which must be imported, since the country does not have its own gas sources. With the commissioning of the Belarusian Nuclear Power Plant (NPP), the situation will not change substantially, while ...2021-01-26 -
Содержание мостов в зимний период
(БНТУ, 2020)The article discusses the maintenance of bridges in the winter, the elimination of possible damage, prevention of damage in the winter.2021-01-26 -
Сотрудничество Китая и Беларуси на промышленной интернет-платформе
(БНТУ, 2020)This article introduces the definition of an industrial Internet platform, analyzes the problems arising in the development of an industrial Internet platform in China, and proposes some solutions. China and Belarus should cooperate on industrial internet platform technologies, laws and regulations, platform network security and cross-domain integration.2021-01-26 -
Сравнительно-правовой анализ приобретения гражданства в Республике Беларусь и Китайской Народной Республике
(БНТУ, 2020)The article characterizes the grounds citizenship acquisition existing in the world practice. The author considers such grounds as filiation and naturalization. The distinctive features of acquiring citizenship in the Republic of Belarus and the People's Republic of China are noted. It is concluded that the acquisition of citizenship has a direct bearing on the legal status of ...2021-01-26 -
Сравнительный анализ маневренных свойств шахтных самоходных вагонов с различными компоновками колесных движителей
(БНТУ, 2020)The analysis of the efficiency of work of self-propelled mine cars as part of tunneling complexes is carried out. Perspective schemes of power supply of self-propelled mine cars, as well as ways of modernizing their wheel propellers are considered. The calculation of the parameters of the wheel propeller control system during the maneuvering of a self-propelled mine car is performed.2021-01-26