2023: Recent submissions
Now showing items 1-20 of 77
-
Биотехнология как экологическая альтернатива классической подготовке целлюлозных текстильных материалов к крашению
(БНТУ, 2023)The technology of biochemical scouring of cotton textile materials has been developed, due to which the maximum purification from impurities with a minimum degree of cellulose damage is achieved.2023-11-11 -
Analysis of mechanical properties of shell aggregate concrete
(БНТУ, 2023)In this paper, the shell aggregate concrete is analyzed, and the sand aggregate is replaced by shell under different particle gradation, and the method of mechanical property test research is adopted for concrete blocks under different sand and gravel replacement rates, and the bending resistance, compression resistance and frost resistance of the block are analyzed, and finally ...2023-11-11 -
Экокожи белорусского производства
(БНТУ, 2023)A technology has been developed for the formation of a polyurethane coating on a woven base (eco-leather). A nomenclature of quality indicators has been developed, in accordance with which the physical and mechanical properties have been studied. It has been established that the materials are resistant to low (–20 °C) and elevated temperatures (up to +70 °C).2023-11-11 -
Evaluation of graphene concrete in a green energy economy
(БНТУ, 2023)This paper discusses the development of graphene concrete and the composition and mechanical application properties of graphene concrete and evaluates its economic sustainability based on its basic properties of green energy.2023-11-11 -
Применение экстрактов из листьев дикорастущих растений белорусского Поозерья как биопротекторов
(БНТУ, 2023)The authors studied the chemical composition of extracts from wild plants. Possibilities were proposed for the use in agriculture of extracts from the leaves of wild plants, which are safe for human health, animals and the environment.2023-11-11 -
Получение активированного угля методом термохимических активаций из белорусского льна и опилок сосны
(БНТУ, 2023)China is a major producer and consumer of activated carbon, with 60 % of the main raw material for activated carbon production being non-renewable resource – coal. Activated carbon prepared from Belarusian flax and pine bark has good adsorption properties and specific surface area, its adsorption capacity for methylene blue is 550–610 mg/g. The specific surface of activated carbons ...2023-11-11 -
大豆玉米带状复合种植模式机械化装备的探究
(БНТУ, 2023)The promotion of soybean corn ribbon composite planting mode is one of the important measures to revitalise the domestic soybean and enhance the oilseed production capacity, which can effectively alleviate the difficulties of China's high degree of foreign dependence on soybeans and high import pressure. This paper summarises the research progress of agricultural machinery at ...2023-11-11 -
China’s accelerated development of AI and possibilities of future cooperation in Belarus
(БНТУ, 2023)The continuous advancement of AI technology is continuously developing China's comprehensive AI infrastructure. Local tech companies represented by Tencent, Baidu, Alibaba and Huawei are emerging as flagship entities for this development. This thesis analyze these advances provides a framework for understanding possible paths for mutual development and cooperation in AI in China ...2023-11-11 -
China's e-commerce market model as an inspiration for Belarus
(БНТУ, 2023)Ma, Wenjun. China's e-commerce market model as an inspiration for Belarus / Wenjun Ma, Ruizhe Shi, Ivan Darashkevich // Беларусь-Китай: контуры инновационно-технологического сотрудничества : сборник материалов научно-практической конференции (Минск, 19-20 октября 2023 г.) // Республиканское инновационное унитарное предприятие «Научно-технологический парк БНТУ «Политехник» ; сост. ...2023-11-11 -
Индекс ровности дорожного покрытия по результатам наземного лазерного сканирования
(БНТУ, 2023)Deformation seams are often used to connect a road with a bridge. The article describes the experience of assessing the index of IRI road coating flatness in the zone of the deformation seam device using ground laser scanning results.2023-11-11 -
China and Belarus cloud computing development
(БНТУ, 2023)Cloud computing is a tangible manifestation of the development of information technology and the innovation of service models. This article aims to understand the level of development of the digital economy in China and Belarus by conducting a comparative analysis of the public cloud in cloud computing. Accelerating the innovative development of cloud computing is crucial for ...2023-11-11 -
数据库并发和并发异常
(БНТУ, 2023)在使用数据库来支撑业务系统时,随着用户量的增大,经常会遇到同时读取相同数据的情况,在没有对数据进行并发控制的情况下就会遇到各种各样的问题,本文章对上述问题讲述了几种解决方法。2023-11-11 -
Разработка информационно-аналитической системы общего доступа для комплексного изучения влияния антропогенных и природных факторов на примере г. Орши и Оршанского района
(БНТУ, 2023)The article presents conceptual approaches to the creation of a weboriented information and analytical system of general access for a comprehensive study of the influence of anthropogenic and natural factors at various regional levels. The prototype for the development of this development is the information and analytical resource "System of online monitoring of the state of ...2023-11-11 -
Информационное проектирование зданий Китая и Беларуси
(БНТУ, 2023)Complex buildings have been designed with the use of information technology for a long time. Two iconic buildings that were designed and operated using BIM technologies are discussed in the article.2023-11-11 -
Research on the impact of digital economy on regional green development in China
(БНТУ, 2023)Since the reform and opening up, the relationship between urban ecological construction and social and economic development in China has gradually completed the transformation from obedience to symbiosis, from passive response to active response. With the continuous innovation of digital information technology, the digital economy is upgrading and reshaping the production mode ...2023-11-11 -
Технико-экономическая демонстрация создания самовосстанавливающегося бетона на основе языка Python
(БНТУ, 2023)In order to develop an external additive suitable for multi-scenario coupled self-healing concrete and verify the feasibility of the theory, the finite element software ABAQUS was selected to verify the structure of the self-healing external additive, and the communication relationship between ABAQUS and the Python language script environment was obtained.2023-11-11 -
Развитие сотрудничества Беларуси и Китая в сфере обмена опытом внедрения искусственного интеллекта в корпоративные бизнес-процессы
(БНТУ, 2023)Belarus and China have been actively collaborating in the field of exchanging experience in implementing artificial intelligence into corporate business processes. This partnership aims to strengthen knowledge-sharing and enhance technological advancements in both nations. With a focus on harnessing the potential of AI, Belarus and China are working hand in hand to drive innovation ...2023-11-11 -
Application of edem software to potato harvesting machinery trials
(БНТУ, 2023)In order to intuitively analyse the role of the potato soil separation device on the material and the screening principle of the lifting chain with rod, the potato harvester is simulated and analysed using the EDEM method, and the EDEM software can get rid of the limitations of the natural environment, intuitively and quickly analyse the screening capacity of the potato harvester, ...2023-11-11 -
5G 技术对于自动驾驶汽车的必要性和未来设想
(БНТУ, 2023)With the development of 5G technology, autonomous vehicles have become the focus of attention again. This article will introduce the principles of self-driving cars to illustrate the necessity of 5G technology for self-driving cars. At the same time, innovative ideas will be put forward for the future development of autonomous vehicles.2023-11-11 -
基于博奥清单软件对工程项目管理的研究
(БНТУ, 2023)With the rapid development of global economy and the continuous progress of engineering technology, the complexity and difficulty of engineering projects are increasing day by day, so the management of engineering projects is faced with many risks and challenges. At the same time, engineering construction projects play an extremely important role in modern society, affecting all ...2023-11-11