Научные и инновационные проекты и инициативы молодежи Беларуси и Китая : сборник материалов конференции в рамках Белорусско-Китайского молодежного инновационного форума "Новые горизонты - 2014", 3-4 декабря 2014 г. – Минск : БНТУ, 2015. – 171 с.

We present the studies of new luminescent sheet covering derived on the basis of inorganic glass matrix activated by YAG:Се3+ fluophor for white LED lamp. The glass matrix were fabricated on the basis BaO–Bi2O3–B2O3 vitreous system. The luminоus composition was prepared by mixing of components with isopropanol, further the slurry was casted on a glass substrate and dried up. The ...

According to the RoHS directive (July 2006), in the European Union the use of a number of hazardous materials is prohibited, including lead in the materials used in the manufacture of electronic equipment. In the world a suitable and complete tin-lead material substitution has not been found by far. The reseach results of the influence of nonstationary electrolysis on current ...

This article describes three ways of how to apply nanomaterials to create new products. The purpose of the article is to inspire innovators to develop nanoindustry using existing nanotechnologies.

In the work with attraction of the planning experiment methods possibility of increase of mechanical strength thin glasses with nominal thickness less than 2 mm by method of chemical hardening in fusion of KNO3 is studied. Regression dependences properties of glasses on temperature and time of processing in melt KNO3 are received. Researches changing of the chemical composition ...

The article is devoted to researches in the field production of ceramic tiles for interior wall covering for single firing technology. The formation of ceramic crock is parallel with the fusing of the glaze by single firing, which causes the appearance of defects on the surface. Found that the use mineralizes shifts the decomposition of dolomite at low temperatures, creating ...

The paper presents the results of the study on self-propagating high-temperature synthesis of mineral matrices based on phase of pyrochlore (Y2Ti2O7) and zirconia additives for immobilize actinide-containing waste (HLW). Investigations carried out in the system Ti - ZrO2 - CaO - Y2O3 - MenOm (Me = Mo, Fe, Ni, Cr, Mn, Cu) using models HLW. But such oxides as MoO3, CuO, MnO2 and ...

This article summarized on existing technical regulations in the construction industry operating in the territory of the Republic of Belarus. An example the analysis of data on used construction machinery in leading organizations of Grodno shows difficulty arising from the normalization of mechanized earth works according to current normative literature.

Mass production of composite rebar is limited by the lack of normative literature about using and testing of composite rebar in building constructions. In United States of America, Canada, European Union, Italy, Japan, Russian Federation there are number of normative documents, that normalize using and testing of composite rebar.

This paper is about the most important investigation result process of laser welding thin stainless and galvanized plates. The feature of this issue was the need to preserve the appearance of side reversed side of welding.