Т. 11, № 3

 

Recent Submissions

  • Контраст изображения объекта, наблюдаемого в условиях задымления, при поляризационной фильтрации излучения, рассеянного частицами дыма 

    Кицак, А. И. (БНТУ, 2020)
    Целью работы являлось исследование контраста изображения объекта, наблюдаемого в задымленной среде, с применением поляризационной фильтрации излучения, рассеянного частицами дыма в сторону наблюдателя, и сопоставление данного контраста с контрастом изображения, формируемого без фильтрации, для оценки возможности разработки комплекта оптических принадлежностей пожарного-спасателя, ...
    2020-09-18

  • Analysis of Requirements and the Feasible Limit for Error Reduction in Two-Parameter Magnetic Determination of Steels’ Hardness 

    Sandomirski, S. G. (БНТУ, 2020)
    All measurements of mechanical properties of materials in the magnetic structural analysis are indirect and relationships between the measured parameters are correlated. An important physical parameter of steel is hardness. An increase in the correlation coefficient R and a reduction in the standard deviation (SD) are achieved when controlling the hardness of steels with two-parameter ...
    2020-09-18

  • Application of Two-Channel Principle in Measuring Devices to Compensate for Disturbing Influences of Unknown Physical Nature 

    Nesterov, V. N.; Li, A. R. (БНТУ, 2020)
    The article notes the advantages of the method of constructing absolutely invariant measuring transducers for working in conditions with disturbing influences. However, this method is not universal. Its limitations are due to the impossibility of "symmetric" transmission of all disturbing influences into parallel measuring channels. A broader interpretation of the two-channel ...
    2020-09-18

  • Determination of Parameters of Electrode Metal Transported Drops by Simulation and Visualization 

    Ilyaschenko, D. P.; Kryukov, A. V.; Lavrova, E. V.; Kuznetsov, M. A.; Verkhoturova, E. V. (БНТУ, 2020)
    The nature of the molten electrode metal melting and transfer is the main process parameter of manual metal arc welding (MMA) with coated electrodes. It significantly affects the efficiency of the welding process. For this reason the relevant task is to identify the parameters of the transferred molten electrode metal drops and their further transfer into the weld pool with maximum ...
    2020-09-18

  • Features of Measuring the Hardness of a Metal Surface Modified with Ultrafine Particles of Minerals 

    Skazochkin, A. V.; Bondarenko, G. G.; Zukowski, P. (БНТУ, 2020)
    One of the important characteristics of the surface properties of metal parts subjected to friction is hardness. Hardness measurements are important for determining the operational characteristics of parts and monitoring the technological regimes of surface modification. However, hardness measurements of thin modified layers made by different methods can lead to differences in ...
    2020-09-18

  • Determination of Flow Characteristics in Technological Processes with Controlled Pressure 

    Reader, T.; Tenenev, V. A.; Chernova, A. A. (БНТУ, 2020)
    Assessment of the environmental and economic performance of a safety valve requires information about the flow of the substance through the valve when it is actuated. The goal of this paper was to determine the flow rate of the discharged substance and the mass flow rate of the substance entering the safety valve when it is actuated. Proposed a mathematical model to describe the ...
    2020-09-18

  • Application of the Correlation Velocity Measurements for Hydrodynamic Investigations of Turbulent Coolant Flow in Nuclear Reactor Elements 

    Konovalov, I. A.; Khrobostov, A. E.; Legchanov, M. A.; Solncev, D. N.; Barinov, A. A.; Ryazanov, A. V.; Chesnokov, A. A.; Makarov, M. A. (БНТУ, 2020)
    The method of correlation measurement of the coolant flow rate, widely used for operational diagnostics of nuclear power plants, can be extensively used in research practice. The aim of this work was to apply a correlation method based on the conductometric measurement system with wire-mesh sensors for measuring a coolant flow rate. Insignificant concentration of a salt solution ...
    2020-09-18

  • Measurement Stand, Method and Results of Composite Electrotechnical Pressboard-Mineral Oil Electrical Measurements 

    Rogalski, P. (БНТУ, 2020)
    The paper presents a measuring stand designed and built for testing direct and alternating current properties of power transformers basic insulation component i.e. electrotechnical pressboard impregnated with transformer oil. Measurements of direct and alternating current parameters are performed using the frequency domain spectroscopy and polarization depolarization current ...
    2020-09-18

  • High Power SESAM Mode-Locked Laser Based on Yb3+:YAlO3 Bulk Crystal 

    Rudenkov, A.; Kisel, V.; Yasukevich, A.; Hovhannesyan, K.; Petrosyan, A.; Kuleshov, N. (БНТУ, 2020)
    Yttrium aluminium perovskite YAlO3 (YAP) crystal, doped with rare-earth ions, has been extensively studied as a diode-pumped laser host material. The wide interest to rare-earth ions doped YAP crystals is explained by its good thermal and mechanical properties, high natural birefringence, widely used Czochralski growth method. The aim of this work was to study the Yb3+:YAlO3 ...
    2020-09-18

  • Measuring Setup for Investigation and Visualization of the Percolation Phenomenon in Non-Оrdered Models of Metal-Dielectric Nanocomposites 

    Okal, P. (БНТУ, 2020)
    The study uses the phenomenon of high voltage partial discharge to investigate the phenomenon of percolation and visualisation of the percolation channel. The phenomenon of partial discharges is very similar to the quantum tunneling phenomenon observed in metal-dielectric nanocomposites. In both cases the flow of alternating current occurs in the absence of direct contact between ...
    2020-09-18