Repository BNTU - Browsing Материалы конференции по статьям by Title

Now showing items 1-20 of 54

Cтруктурообразование диффузионных боридных слоев при предварительной активации

Ушеренко, Ю. С.; Дашкевич, В. Г.; Миронов, В. А. (БНТУ, 2020)

The features of the structure formation of diffusion layers obtained by a technology including preliminary surface treatment of steel products made of U8 steel and subsequent boriding in powder media have been investigated. The pretreatment consisted of dynamic alloying in the superdeep penetration (SDP) mode with a SiC-based powder composition. As a result, the thickness of the ...

2021-02-03
Влияние интеллектуального потенциала на инновационную деятельность предприятия

Смёткина, А. В. (БНТУ, 2020)

The main targe of innovation is to ensure production efficiency and innovative development. It is the level of intellectual potential that affects the improvement of the innovative activity of the enterprise and production as a whole. Therefore, special attention is paid to personnel and their preparedness, since the employee becomes the main means of increasing the efficiency ...

2021-02-03
Вопросы внедрения информационно-коммуникационных технологий в лесное хозяйство Республики Беларусь

Веренич, Г. Д.; Марцева, С. В.; Гуторова, Е. С. (БНТУ, 2020)

This article discusses the implementation of information and communication technologies in the forestry of the Republic of Belarus.

2021-02-03
Газопламенное напыление сверхвысокомолекулярного полиэтилена на поверхность пара-арамидных тканей

Девойно, О. Г.; Пилипчук, А. П. (БНТУ, 2020)

A technology has been developed for the formation of multilayer coatings of ultra-high molecular weight polyethylene on the surface of para-aramid fabrics by flame spraying. This technology allows to obtain materials with specific strength at the level of structural steels.

2021-02-03
Геодезический метод определения ровности дорожного покрытия с использованием квадрокоптера

Комадей, И. Ю.; Жуковский, Е. М. (БНТУ, 2020)

The disadvantages of existing methods for determining the evenness of the road surface make it necessary to search for new ones. The introduction of air laser scanning technology from a quadrocopter makes it possible to significantly speed up the process of performing work compared to instrumental shooting, allow you to get a digital model of the area, as a result of which data ...

2021-02-03
Двухслойные пористые керамические материалы для микрофильтрации дисперсных систем

Павлюкевич, Ю. Г.; Климош, Ю. А.; Гундилович, Н. Н.; Скрипкиунас, Г.; Кизиниевич, О. (БНТУ, 2020)

The compositions and technological parameters of obtaining filtering corundum and quartz ceramic materials with functional membrane coatings obtained in the Al2O3–ZnO, Al2O3–Fe2O3, Al2O3–CuO and Al2O3–MnO2 systems were developed; the regularities of the process of formation of a layered porous permeable structure have been established in conjunction with the physicochemical ...

2021-02-03
Индикаторы инновационного развития Республики Беларусь

Пономарёва, Н. П. (БНТУ, 2020)

The article analyzes the indicators of the innovative development of Belarus in 2017-2019, which underlie the assessment of the national innovation system.

2021-02-03
Искусственный интеллект: объект либо субъект правовых отношений

Гринчук, М. П. (БНТУ, 2020)

Currently, science and technology have come close to the active implementation of artificial intelligence systems in various spheres of society. With the development of science and technology, artificial intelligence will gradually receive opportunities to perform independent, including legally significant, actions. Today, there is no doubt that artificial intelligence systems ...

2021-02-03
Использование в производстве автоклавного ячеистого бетона модифицирующих добавок, обеспечивающих ресурсосбережение и повышение качества готовой продукции

Сенатова, К. С.; Олецкая, Л. П.; Фоменок, И. И.; Чернякевич, Л. А. (БНТУ, 2020)

In this work, the additive S-DrillTMCL grade A produced by SOOO Synergikom was investigated; "Stachement 2000M" produced by JLLC "Stakhema-M". The obtained research results indicate the advisability of using modifying additives in the technology of autoclaved aerated concrete. The results of industrial tests have shown the effectiveness of their use in order to save resources and ...

2021-02-03
Использование лазерной локальной обработки для повышения изгибной жесткости

Kapustynskyi, O. (БНТУ, 2020)

Experimental studies using laser processing are presented, aimed at increasing the rigidity of thin-sheet structures made of carbon steel. Based on the results of the experiments, it was found that local laser treatment can be used to increase the rigidity of structural elements and reduce their deformation under a similar load.

2021-02-03
Использование минераловатных отходов в технологии производства автоклавного ячеистого бетона

Жаврид, А. С.; Сенатова, К. С.; Олецкая, Л. П. (БНТУ, 2020)

In this work, the possibility of using wastes from the mineral wool production of JSC "Gomelstroymaterialy" in the technology of aerated concrete production was studied. It was found that the introduction of mineral wool waste makes it possible to increase the compressive strength of aerated concrete by 15.8–26.3 %.

2021-02-03
Исследование влияния наноуглеродных модификаторов на триботехнические характеристики композиционных газотермических покрытий

Ванюк, Э. А.; Сокоров, И. О.; Леванцевич, М. А. (БНТУ, 2020)

One of the main tasks in mechanical engineering is to increase the resource of machine parts and mechanisms. To create competitive products, it is necessary to develop coatings with high performance properties, but at the same time economically feasible. In this work, a study was made of the effect of nanocarbon components on the tribotechnical properties of thermal gas composite ...

2021-02-03
Исследования возможности замены природного щебня и гравия вторичным сырьем при строительстве и ремонте дорог

Губская, А. Г.; Гапотченко, А. П.; Сенатова, К. С.; Олецкая, Л. П. (БНТУ, 2020)

The article is devoted to the study of physical-mechanical and physical-chemical properties of crushed stone obtained by crushing secondary materials. On the basis of comparison of properties of secondary crushed stone and crushed stone from natural materials, the possibility of its use for the device of roads of low categories, intra-factory and transport and technological ways ...

2021-02-03
Лазерное легирование поверхности мартенситно-стареющей стали

Бучелис, К.; Жлёба, К.; Шкамат, Е. (БНТУ, 2020)

Бучелис, К. Лазерное легирование поверхности мартенситно-стареющей стали / К. Бучелис, К. Жлёба, Е. Шкамат // Сотрудничество - катализатор инновационного роста : сборник материалов 6-го Белорусско-Балтийского форума, Минск, 22–23 декабря 2020 года / Белорусский национальный технический университет. – Минск : БНТУ, 2020. – С. 29.

2021-02-03
Методы стимулирования инвестиционно-инновационного развития предприятий

Ганущенко, А. О.; Козленкова, О. В. (БНТУ, 2020)

The issues of improving the management of economic development mechanisms based on increasing the innovation potential are described. The directions of increasing the economic efficiency of enterprises in modern conditions based on the use of scientific and technological progress are proposed.

2021-02-03
Мировой опыт организации патентно-информационного сопровождения исследований и разработок

Калинин, А. Ю. (БНТУ, 2020)

The article presents the world experience in the implementation of programs and projects for the creation of structures for patent information support, the organization of their activities and support by higher organizations.

2021-02-03
МКЭ-анализ крутильно-изгибного нагружения бионической несущей структуры, характерной для балтийского региона

Довнар, С. С.; Пенкина, А. Д. (БНТУ, 2020)

FEA simulation of the Baltic tree’s bionic load-bearing structure is provided. An array of trees is virtually constructed with heuristic variations in the branch sections and crown shapes. Eccentric wind loads are applied so bending and twisting deformations were simulated. Ironed stress bands (ISB), going along the branch in its middle part, are stated as a steady feature of the ...

2021-02-03
Модель реализации концепции экономики знаний в территориально-инновационных структурах

Данильченко, А. В.; Харитонович, С. А. (БНТУ, 2020)

The article discusses a level model for the implementation of the concept of the knowledge economy, which ensures the consistent and stable development of organizations that form the area of intersectoral synergy of knowledge.

2021-02-03
Новые наноструктурные каталитические материалы на основе MgLnxFe(2-x)O4, для деструкции органических поллютантов

Прозорович, В. Г.; Иванец, А. И. (БНТУ, 2020)

The advisability of doping of magnesium ferrite with rare earth elements to obtain on their basis new nanostructured Fenton-like catalysts for the destruction of organic pollutants has been substantiated. The main advantages of the materials being developed are the high efficiency of oxidative destruction and mineralization of organic pollutants in aqueous media.

2021-02-03
Обеспечение радонозащиты в зданиях

Губская, А. Г.; Вашкевич, Т. А.; Ушакова, Н. И. (БНТУ, 2020)

The article is devoted to the research of radiation safety of building materials and raw materials for their production, as well as radon safety of newly constructed, projected and reconstructed buildings and structures.

2021-02-03