The exact determination of Vickers HV hardness is important for determining of the product material mechanical properties. An important aspect of measuring HV is to obtain its values on a non-planar surface. Regulatory documents contain table values of correction factors K which depend on the surface shape (convex or concave, spherical or cylindrical), its curvature (diameter D) ...

The paper presents a new view of vector physical quantities as multicomponent quantities. Each of the components of the mentioned multicomponent quantities can carry important and even unique information about the sources and causes of their occurrence. Looking at the vector quantity as the multicomponent quantity led to the need to form the corresponding conception. There are ...

Radionuclide 238U is one of the most important radioactive elements that must be controlled in nuclear power engineering, geological exploration, control of radioactive contamination of soils and raw materials used in construction. The most optimal way to control 238U is to use the 234mPa radionuclide, the activity of which, due to its short lifetime (≈ 1.2 min), is unambiguously ...

The main characteristics of airborne micro/nanoparticles, their impact on human health and air quality standards are presented. International standards classify microparticles by size (PM10, PM2.5, PM1, UFP), establish maximum allowable concentrations and control methods. Particular attention is paid to carbonand virus-containing microparticles control. To monitor the air environment ...

Solving the problems of spectral processing of single and quasi-periodic signals in measurement and diagnostic systems is directly related to their isolation against the background of external interference or noise. The purpose of this work was to study single and quasi-periodic signals, i. e. signals limited in time, presented as separate components; development of a mathematical ...

Study of dimensional parametersʼ influence on shielding properties of cylindrical shields will allow to optimise the fusion process, as well as to reduce production costs by reducing the material used. The purpose of this work was to compare results of theoretical calculation of shielding effectiveness of an infinite cylindrical shield with the data obtained in real conditions. ...

Method for determining of the fracture toughness of brittle materials by indentation is described. The critical stress intensity factor KIC quantifies the fracture toughness. Methods were developed and applied to improve the accuracy of KIC determination due to atomic force microscopy and nanoindentation. It is necessary to accurately determine parameters and dimensions of the ...

This work considers a model for measuring non-additive quantities, in particular a model for subjective measurement. The purpose of this work was to develop the measurement theory and form of a measurement model that uses the corrected S. Stevens measurement model. A generalized structure was considered that included an empirical system, a mathematical system, and a homomorphism ...

Thermocouples dynamic characteristicsʼ prediction is one of the relevant directions in the field of dynamic measurements of non-stationary temperatures of liquid and gaseous media. Thermocouples dynamic characteristicsʼ prediction makes it possible to provide effective continuous correction in automatic control systems for non-stationary temperatures. The purpose of this paper ...

One of the possible ways of improvement of the surface properties of silicon is the solid phase recrystallization of the surface silicon layer after the chemical-mechanical polishing with application of the rapid thermal treatment with the pulses of second duration. The purpose of the given paper is investigation of influence of the rapid thermal treatment of the initial silicon ...