Материалы конференции по статьям: Recent submissions
Now showing items 41-54 of 54
-
Использование минераловатных отходов в технологии производства автоклавного ячеистого бетона
(БНТУ, 2020)In this work, the possibility of using wastes from the mineral wool production of JSC "Gomelstroymaterialy" in the technology of aerated concrete production was studied. It was found that the introduction of mineral wool waste makes it possible to increase the compressive strength of aerated concrete by 15.8–26.3 %.2021-02-03 -
Расширение диапазона сырьевых компонентов керамических масс при получении пористых теплоизоляционных материалов
(БНТУ, 2020)Ceramic mass сompositions of the raw materials containing wastes from the mining and metallurgical industries were developed as a result of the experimental studies. Ceramic masses were made for preparing raw granules and thermal-insulating materials were obtained with a set of required physical and mechanical characteristics.2021-02-03 -
Улучшение фотоэлектрических свойств ячейки перовскита на основе метиламмония иодида свинца путем оптимизации характеристик катодного слоя TiOx
(БНТУ, 2020)The influence of the characteristics of the TiOx-based cathodic layer on the photoelectric properties of the perovskite cell was investigated. The formed TiOx layer played the role of an n-type semiconductor. A 2 μm thick perovskite layer based on methylammonium lead iodide was deposited by centrifugation in an argon atmosphere at 85-90 °C. At the final stage, the cathodic and ...2021-02-03 -
Исследование влияния наноуглеродных модификаторов на триботехнические характеристики композиционных газотермических покрытий
(БНТУ, 2020)One of the main tasks in mechanical engineering is to increase the resource of machine parts and mechanisms. To create competitive products, it is necessary to develop coatings with high performance properties, but at the same time economically feasible. In this work, a study was made of the effect of nanocarbon components on the tribotechnical properties of thermal gas composite ...2021-02-03 -
Газопламенное напыление сверхвысокомолекулярного полиэтилена на поверхность пара-арамидных тканей
(БНТУ, 2020)A technology has been developed for the formation of multilayer coatings of ultra-high molecular weight polyethylene on the surface of para-aramid fabrics by flame spraying. This technology allows to obtain materials with specific strength at the level of structural steels.2021-02-03 -
Лазерное легирование поверхности мартенситно-стареющей стали
(БНТУ, 2020)Бучелис, К. Лазерное легирование поверхности мартенситно-стареющей стали / К. Бучелис, К. Жлёба, Е. Шкамат // Сотрудничество - катализатор инновационного роста : сборник материалов 6-го Белорусско-Балтийского форума, Минск, 22–23 декабря 2020 года / Белорусский национальный технический университет. – Минск : БНТУ, 2020. – С. 29.2021-02-03 -
Использование лазерной локальной обработки для повышения изгибной жесткости
(БНТУ, 2020)Experimental studies using laser processing are presented, aimed at increasing the rigidity of thin-sheet structures made of carbon steel. Based on the results of the experiments, it was found that local laser treatment can be used to increase the rigidity of structural elements and reduce their deformation under a similar load.2021-02-03 -
Триботехнические характеристики комбинированных покрытий, содержащих керамическую фазу
(БНТУ, 2020)Paper is devoted to the investigation of features of coatings formed by plasma deposition of mechanical mixture of Ni-Cr-based self-fluxing and aluminum oxide powders. Tribological propertied of coatings obtained are determined. Tests are implemented for dry friction mode. Friction coefficient and temperature in friction contact are established. The presence of Al2O3 in the ...2021-02-03 -
«Один Пояс-Один Путь»: возможности инновационной деятельности
(БНТУ, 2020)The article analyzes the paradigm of innovation in the context of the One Belt — One Road initiative with an emphasis on the potential of the Great Stone Industrial Park.2021-02-03 -
Получение наноструктурированных термически напылённых NiCrFeCSeB/WC покрытий с использованием лазерной обработки
(БНТУ, 2020)Шкамат, Е. Получение наноструктурированных термически напылённых NiCrFeCSeB/WC покрытий с использованием лазерной обработки / Е. Шкамат, Ж. Чепуке, О. Чернашеюс // Сотрудничество - катализатор инновационного роста : сборник материалов 6-го Белорусско-Балтийского форума, Минск, 22–23 декабря 2020 года / Белорусский национальный технический университет. – Минск : БНТУ, 2020. – С. 30-31.2021-02-03 -
Особенности получения быстротвердеющих высокопрочных сульфоалюмоферритных цементов
(БНТУ, 2020)The article presents the results of the study of composition and properties of manmade raw materials for the synthesis of fast-curing high-strength sulfo-alumino-ferritic cements. Researching the processes of phase and structure formation in the process of synthesis of clinkers for sulfo-alumino-ferritic cement are reviewed. The physical, mechanical, construction and technical ...2021-02-03 -
Приемы и методы неценовой конкуренции в промышленности
(БНТУ, 2020)The article is devoted to the industrial competition methods. The article highlights that today there are price and non-price paths of economic competition. Price competition is carried out by reducing the cost of goods and it is effective in introducing new goods to the market. Non-price competition methods include product diversification, quality improvement, and advertising. ...2021-02-03 -
Стимулирование инновационной активности предприятий Республики Беларусь
(БНТУ, 2020)Today, the development of the economy of any state is inextricably linked to the place and pace of development of the innovation process. Indicators of innovative activity of enterprises largely depend on the innovation policy adopted in the state, as well as on the ways to stimulate innovation activity. In this regard, it is necessary to assess the effectiveness of each measure ...2021-02-03 -
Развитие предпринимательской среды университета: роль научно-технологического парка
(БНТУ, 2020)The article presents the most important conditions and mechanisms for the formation of an entrepreneurial environment of the university, which is created due to the functioning of the scientific and technological park on the example of the Belarusian National Technical University and the Science and Technology Park BNTU "Polytechnic".2021-02-03
